| Digital inputs configurable |
No |
| Digital outputs configurable |
No |
| Type of voltage (input voltage) |
DC |
| Type of output voltage |
DC |
| Type of digital output |
Relay |
| Type of electric connection |
Screw connection |
| Status indicator |
4 yellow |
| Output delay time, max |
OFF to ON: 10 ms, ON to OFF: 10 ms |
| Wiring category |
2 – on signal ports, 2 – on power ports |
| Number of I/O |
4-channel relay output |
| Relay contact, continuous |
2.0 A @ 120V AC maximum volts, 0.35 power factor |
| Relay contact, make |
7.5 A @ 240V AC maximum volts, 0.35 power factor |
| Relay contact, break |
28VA @ 24V DC maximum volts, 0.35 power factor |
| Pilot duty rating |
C300, R150 |
| Insulation stripping length |
5 mm |
| Wire size |
0.05…1.31 mm2 (30…16 AWG) solid copper wire rated @ 90 °C (194 °F ) insulation maximum |
| Isolation voltage |
240V (continuous), reinforce insulation type, between output channels and output channels to backplane type tested for 60 s @ 1480V AC Outputs to Outputs, Outputs to Backplane |
| Redundancy |
No |
| SIL according to IEC 61508 |
None |
| Minimum load per point |
10 mA |
| Initial contact resistance of relay, max |
30 mOhm |
| Wire type |
Copper |
| Backplane power |
3.3V DC, 38 mA |
| Inrush current |
<120 mA @ 3.3V, <120 mA @ 24V |
| Output current, resistive |
2 A @ 5…30V DC, 0.5 A @ 48V DC, 0.22 A @ 125V DC, 2 A @ 125V AC, 2 A @ 240V AC |
| Output power, resistive, max |
250VA for 125V AC resistive loads, 480VA for 240V AC resistive loads, 60VA for 30V DC resistive loads, 24VA for 48V DC resistive loads, 27.5VA for 125V DC resistive loads |
| Output current, inductive |
1.0 A steady state @ 5…28V DC, 0.93 A steady state @ 30V DC, 0.5 A steady state @ 48V DC, 0.22 A steady state @ 125V DC, 2.0 A steady state, 15 A make @ 125V AC, PF – cos θ = 0.4, 2.0 A steady state, 7.5 A make @ 240V AC, PF – cos θ = 0.4 |
There are no reviews yet.