| Voltage type for actuating |
AC |
| Rated control supply voltage at AC 50 Hz |
110 V |
| Rated control supply voltage at AC 60 Hz |
120 V |
| Current (Ie), max |
97 A |
| Switching frequency, max |
200 ops/h |
| Main current circuit resistance |
2 mOhm |
| Cross section per UL/CSA |
16 AWG |
| Rated operational current for contactor at elevator duty (UL/CSA) |
21.0 A @ 460V |
| Rated operational power for contactor at elevator duty (UL/CSA) |
5 Hp @ 230V |
| Rated isolation voltage (Ui) |
690V @ IEC |
| Rated voltage (Ue) |
690V @ AC, 50/60 Hz |
| Rated operational power for contactor at wye-delta |
7 1/2 Hp @ 200V, 60 Hz |
| Rated filament current |
22 A @ 230/240V, AC-5b |
| Power dissipation |
3.2 W @ 400V, AC-3, Ie |
| Coil terminal conductor cross section |
1…4 mm^2 @ 2 conductor |
| Rated current (enclosed) |
24 A @ 115V, 1-phase per UL/CSA |
| Rated power (enclosed) |
7.5 Hp @ 230V, 3-phase per UL/CSA |
| Coil consumption pick-up (avg/peak) |
14/22 W @ DC (electronic-EA) |
| General purpose current (enclosed) |
30 A per UL/CSA |
| Capacitance, max |
500 µF @ short-circuit current of 20 kA |
| Switching of low inductive loads |
32 A @ 440V, AC-7a per IEC 61095 (50 Hz) |
| Operating limits, pick-up |
(0.85…1.1) x Us @ 50 Hz, 60 Hz, 50/60 Hz |
| Switching of motor load |
23 A @ 230V, AC-7b per IEC 61095 (50 Hz) |
| Short time withstand (Icw) |
215 A for 10 s, 60 °C |
| Coil consumption, hold-in |
3 W @ DC (electronic-EA) |
| Coil consumption, pick-up |
105VA @ 50 Hz, 60 Hz, 50/60 Hz |
| Operating time |
15…30 ms @ AC closing delay |
| Total power dissipation |
DC control (electronic): 4.9 W @ 400V, AC-3, Ie |
| Operating limits, dropout |
(0.3…0.6) x Us @ 50 Hz, 60 Hz, 50/60 Hz |
| Switching of lamps |
Gas discharge lamps, open: 29 A @ 40 °C (104 °F), AC-5a |
| Switching of hermetically sealed cooling compressor motors |
32 A @ 500V, AC-8a (manual reset of overload release (50 Hz)) |
| Coil insulation class |
Class F per IEC 60085, UL Class 105 |
| Rating for switching AC motors |
3-poles: 7.5 kW @ 230V (AC-2, AC-3, AC-4), 3-phase (50 Hz) |
| BS88 fuses current rating |
Type 2 (per IEC 60947-4-1): 50 A @ 415V, 65 kA available fault current |
| UL class K5 and RK5 fuses rating |
90 A @ 600V, 5 kA available fault current per UL 508 and CSA 22.2 No. 14 |
| UL class CC and CSA HRCI-MISC fuses rating |
40 A @ 100 kA available fault current per UL 508 and CSA 22.2 No. 14 |
| UL inverse-time circuit breaker |
50 A @ 480V, 5 kA available fault current per UL 508 and CSA 22.2 No. 14 |
| Rated operational current (Ie) |
9 A @ 690V, AC-4 (approximately 200000 operations) |
| Rated operational power (Pe) |
7.5kW @ 690V, AC-4 (approximately 200000 operations) |
| DIN fuses (gG, gL) current rating |
Type 2 (per IEC 60947-4-1): 40 A @ 690V, 50 kA available fault current |
| UL class J and CSA HRCI-J fuses rating |
40 A @ 100 kA available fault current per UL 508 and CSA 22.2 No. 14 |
| Switching of power transformers |
Apparent power: 9.4 kVA @ 500V, AC-6a 50 Hz (n = 30) |
| Switching of 3-phase Capacitors |
Single capacitor: 9 kVAR @ 240V, AC-6b 50 Hz, 60 °C (Inductance of leads between capacitors in parallel: min. 6 µH) |
| Switching of DC loads |
3-Poles in series:32 A @ 110V (Non-inductive or slightly inductive loads or resistance furnaces DC-1 at 60 °C) |
| Contacts |
3 power poles with internal NO or NC auxiliary contact or 4 power poles (9…23 A), Optional front-or side mounted 1-2 or 4-pole external auxiliary contact block |
| Function |
Reversing contactor |
| Rated impulse voltage withstand (Uimp) |
6 kV |
| Conventional coil type |
Yes |
| Electronic-EI coil type |
Yes |
| Rated coil frequency |
AC 50/60 Hz, DC |
There are no reviews yet.