Name: 1420-V2P-ENT, Powermonitor 500 Ethernetip Power Meter
SKU: 1420-V2P-ENT
Availability: InStock

Voltage (by direct connection or VT/PT)	400/600V LL
Input impedance	5(6)A, < 0.2VA
Current overloads	6 A, at 50/60 Hz, Continuous
Control power	Range: 100 to 240V AC (48 to 62 Hz)
Voltage overloads	2 × Vnom (where Vnom is the nominal voltage of the module), for 500 ms
Coupling type	With CTs
Temperature drift	≤ 200 ppm/°C
Current range (by CT)	5 A nominal (6 A maximum)
Rated inputs	System type: 1, 2, or 3-phase
Current type	Galvanic insulation with built-in CTs
Method	True RMS measurements of distorted wave forms
Sampling rate	3840 sAles/s at 60 Hz, 3200 sAles/s at 50 Hz
Energy additional errors	According to EN62053-21 ANSI C12.1, influence quantities Class B according to EN50470-3, EN62053-23

Current sensing	Nominal: 5 A
Voltage sensing	Nominal: 400V AC LN, 600V AC LL Range: 160 to 480V AC LN RMS, 277 to 830V AC LL RMS
Pulse (digital) output	True

Height	Front dimensions: 96 mm
Width	Front dimensions: 96 mm
Accuracy	Voltage, nominal: 400V AC LN, 600V AC LL @ 25 °C ±5 °C, R.H. ≤ 60% @ 48…62Hz
Optional Ethernet port supporting EtherNet/IP and Modbus TCP/IP	True
System and single phase average and maximum variables	True
Real-time clock function	True
An optional pair of digital (relay) outputs	True
Run hours counter	8+2 digits
Energy measurements (imported/exported)	KWh and kVARh
Front protection degree	IP65, NEMA 4X, NEMA 12
Metering values display	Four rows with 4 digits
Energy value display	Ten digits and the plus/minus sign
Universal power supply	120/240V AC 50/60 Hz or 120/240V DC
Revenue grade energy measurements	Per ANSI C12.1 Class 1.0, ANSI C12.1
configurable virtual alarms	Up to four
Three-phase (system) variables	V(L-L), V(L-N), A, VA, W, VAR, power factor, frequency
Single phase variables	V(L-L), V(L-N), A(L), An (calculated), VA, W, VAR, power factor
Class	• Class 1 (kWh) according to EN62053-21, • Class B (kWh) according to EN50470-3, • Class 2 (kVARh) according to EN62053-23

Line-neutral RMS	Maximum @ 160 to 480V AC
Line-line RMS	Maximum @ 277 to 830V AC
Start up current	5
Current sensing model	Inominal: 5 A, Imaximum: 6A
Line-neutral voltage	In the range Vnom: ±(0.5% RDG +1 digit)
Line-line voltage	In the range Vnom: ±(1.0% RDG +1 digit)
Current all models	From 0.01 to 0.25 A: ±(1.0% of reading (RDG) + 2 digits From 0.25 to 6 A: ±(0.5% RDG +2 digits)
Real and apparent power	From 0.05 to 0.25 A, PF 1: ±(2% RDG +1 digit) From 0.25 to 6A, PF 0.5L, PF1, PF 0.8C: ±(1.0% RDG+1 digit)

Configuration	Use the front keypad
Pulse type	The listed variables can be connected to any output
Pulse weight	Progmable from 0.001 to 9999 kWh or kVARh per pulse
Alarms	Up alarm and down alarm that is linked to the virtual alarms
Response time	Minimum @ ≤200 ms, filters excluded. Set-point on-time delay: ‘0 s’
Pulse signal retransmission	Total: +kWh, -kWh, +kVARh, -kVARh. Partial: +kWh, -kWh, +kVARh, -kVARh
Pulse duration	100 ms ≤ ON-state < 120 ms, OFF-state ≥ 120 ms, According to EN62053-31
Communication controlled outputs	The activation of the outputs is managed through the serial communication port
Function	The outputs can work as alarm outputs but also as digital outputs, communication controlled outputs, or in any other combination
Physical outputs	2
Purpose	For either alarm output or digital output
Type	Relay, SPDT type: • AC 1 – 5A @ 250V AC, • AC 15 – 1A @ 250V AC, • DC 12 – 5A @ 24V DC, • DC 13 – 1.5A @ 24V DC

Crest factor	≤3 (15 A max peak)
Power factor	PF: Yes
Reactive energy (kVARh)	Class 2 according to EN62053-23, ANSI C12.1
Frequency	Hz: Yes
Real energy (kWh)	Class 1 according to EN62053-21, ANSI C12.1 Class B according to EN50470-3
Reactive power (kVAR)	True
Current	True
Real power (kW)	True
Apparent power (kVA)	True
Real power consumption (kWh)	True
Reactive power consumption (kVARh)	True
Apparent power consumption (kVAh)	True
Demand power factor	True
Demand (kW)	True
Demand (kVAR)	True
Demand (kVA)	True
Voltage	True

Immunity to radiated electromagnetic fields	Test without any current: 30V/m from 80 to 2000 MHz
Storage temperature	-30 to +70 °C (-22 to +158 °F) (R.H.P178 < 90% noncondensing @ 40 °C) according to EN62053-21, EN50470-1 and EN62053- 23
Operating temperature	-25 to +40 °C (-13 to +104 °F) (R.H. from 0…90% noncondensing @ 40 °C) according to EN62053-21, EN50470-1 and EN62053- 23
Noise rejection CMRR	100 dB, 48 to 62 Hz
Electrostatic discharge	15 kV air discharge
Radio frequency suppression	According to CISPR 22
EMC	According to EN62052-11
Dielectric strength	4 kV AC rms for 1 min
Installation category	Cat. III (IEC60664, EN60664)
Immunity to conducted disturbances	10V/m from 150 KHz to 80 MHz
Burst	On current and voltage measuring inputs circuit: 4 kV
Surge	On current and voltage measuring inputs circuit: 4 kV, on ‘L’ auxiliary power supply input: 1 kV

Connections	Screw-type
Cable cross-section area	2.5 mm2 AWG) max, Screw tightening torque: 0.4 N•m min/0.8 N•m max, Suggested screw tightening torque: 0.5 N•m

Ampere meter	True
Blind power meter	True
Frequency meter	True
Pulse counter	True
Voltmeter	True
Effective power measurement device	True

Pollution degree	2
Screw terminals	IP20
Mounting	Panel mounting
Depth behind panel	Maximum @ 81.7 mm (3.2 in.)
Material	ABS, self-extinguishing: UL 94 V-0
Weight	Approx 400 g (0.88 lb) (packing included)
Dimensions (WxHxD)	Module holder: 96 x 96 x 50 mm (3.78 x 3.78 x 1.97 in.), Digital and analog output type modules: 89.5 x 63 x 16 mm (3.52 x 2.48 x 0.63 in.), Serial and Ethernet Communication type modules: 89.5 x 63 x 20 mm (3.52 x 2.48 x 0.79 in.)

Configurable via software tool	True
Configurable alarms	True
Voltage rotation phase sequence	True

EtherNet/IP and Modbus TCP/IP	True

Sales Info