Technical Specifications
Environmental Specifications
| Vibration | 2 G |
|---|---|
| Shock | 50 G, nonoperating |
| Dielectric withstand | UL61010, EN61010 |
| Storage temperature | -40 to 85 °C |
| Operating temperature | -20 to 70 °C |
| Altitude | 2000 m, max |
| Installation location | Indoor use only |
| Humidity | 5…95% noncondensing |
Hardware Features
| Height | 132 mm |
|---|---|
| Width | 185 mm |
| Control power and ground wiring terminals | • 120…240V AC, 50/60 Hz, or 120…240V DC • 24V DC |
| Virtual wiring correction indicator | Indicates that a virtual wiring correction command has been applied to resolve wiring errors without rewiring |
| Voltage sensing wiring terminals | • Direct connect to up to 690V AC 3-phase line to line • Maximum nominal line to ground voltage 690 • Use potential transformers (PTs) for higher voltages • Neutral voltage and ground voltage connections |
| Device status indicators | • Device status – OFF: No control power – Flashing GREEN/RED: Self-test – Flashing GREEN: Power monitor has not been configured – GREEN: Power monitor is running – Flashing RED: Power monitor has detected a recoverable minor fault – RED: Power monitor has detected a non-recoverable major fault |
| Ethernet network port – standard RJ45 jack with status indicators | Ethernet port hardware is included on all models. These protocols and functions are supported: • EtherNet/IP™ network • HTML web page for configuration and data access Ethernet indicators • LNK indicator – Solid GREEN: IP link established – Off: No link established • ACT indicator – Flashing YELLOW: Data present on Ethernet port – Off: No data activity present |
| USB host port | USB standard A receptacle. Not used in this model. |
| Power | •Power status – OFF: no control power – GREEN: control power is present |
| Current sensing wiring terminals | Nominal input current 5 A, Use current transformers (CTs) to connect to power system |
| Configuration lock switch | When enabled, this switch helps prevent changes in configuration that can affect revenue accuracy. |
| USB device port | The USB device port is a USB Mini-B receptacle that accepts standard USB Mini-B plugs, for connection to a host device, such as a notebook computer. |
| Status input, KYZ output, and control relay wiring terminals | • Four internally powered (24V DC) status inputs • Status input 2 can be used for demand period synchronization • KYZ DPDT solid-state relay for signaling use • Three DPDT control relays |
| Network status indicators | • Network status (Native Ethernet port) – OFF: No control power – Flashing GREEN/RED: Self-test – Flashing GREEN: No CIP connection – Solid GREEN: CIP connection established – Flashing RED: CIP connection timed out – Solid RED: Duplicate IP address detected |
Control Relay
| IC rating class | UL 508, CSA 22.2 @ DC: Q300 |
|---|---|
| Resistive load switching | 10 A @ 24V DC, maximum |
| Load switching | 100 mA @ 5V AC, 50/60 Hz, RMS, minimum |
| Motor load switching | 1/3 HP @ 125V AC, 50/60 Hz, RMS, maximum |
| Make values | (Inductive load) 30 A @ 120V AC, 50/60 Hz, RMS, maximum |
| Break values | (Inductive load) 3 A @ 120V AC, 50/60 Hz, RMS, maximum |
Measured Parameters
| Crest factor | V-V, V-N, and I, per phase: Yes |
|---|---|
| Reactive energy (kVARh) | Yes |
| Frequency | Nominal: 60 Hz |
| Real energy (kWh) | Yes |
| Reactive power (kVAR) | Yes |
| Real power (kW) | Yes |
| Apparent power (kVA) | Yes |
| Real power demand (kW) | Yes |
| Reactive power demand (kVAR) | Yes |
| Apparent power demand (kVA) | Yes |
| Demand power factor | Yes |
| Projected kW demand | Yes |
| Projected kVAR demand | Yes |
| Projected kVA demand | Yes |
| Voltage unbalance | Yes |
| Current unbalance | Yes |
| Voltage, L-L and L-N | Yes |
| Current per phase and total | Yes |
| Symmetrical component analysis | Yes |
| True power factor per phase and total | Yes |
| Displacement power factor per phase and total | Yes |
| Apparent energy (kVAh) | Yes |
| Demand, amps | Yes |
| Projected amps demand | Yes |
| EN 61000-4-30 10/12 cycle metering | Yes |
| Current consumption | Yes |
Input/output specifications
| KYZ output | Solid-state KYZ: 80 mA @ 240V AC/V DC |
|---|---|
| Control voltage (L1, L2) | 85…264V AC 47…63 Hz Or 106…275V DC |
| Voltage sense inputs: V1, V2, V3, VN | Input impedance: 5M ohm minimum |
| Current sense inputs: I1, I2, I3, I4 | Starting current : 5 mA |
| Control voltage | 22.8…25.2V DC @ 24V DC |
| Control relay | ANSI C37.90 trip duty: 2005 |
Other Functions
| Status inputs | Yes |
|---|---|
| Configurable via webpage | Yes |
| CIP energy object | Yes |
| Security | Yes |
| Wiring diagnostics | Yes |
| Virtual wiring correction | Yes |
| Network time synchronization | Yes |
| Network demand synchronization | Yes |
| IEEE 1588 precision time protocol | Yes |
| Pulse (digital) output (relay and KYZ) | Yes |
| Setpoint programming | Yes |
| Sag and swell detection | Yes |
| Web page | Yes |
| K-factor | Yes |
| Revenue accuracy | Yes |
| Total harmonic distortion (THD) | Yes |
| Waveform capture | Yes |
| Individual harmonics (DC-63rd) | Yes |
| Event synchronization | Yes |
| Individual harmonics (DC-127th) | Yes |
| Interharmonics | Yes |
| Transient detect | Yes |
| Flicker | Yes |
Input/Output Specifications
| Control power | 12VA @ 24V DC |
|---|---|
| Current sense inputs: I1, I2, I3 | Accuracy: ±0.1% @ 25 °C 50/60 Hz unity power factor |
General specifications
| Power functions | • ANSI C12.20 -2010 class 0.2 clause 5.5.4 • EN 62053-22 -2003 class 0.2 accuracy clause 8 |
|---|---|
| Demand functions | • ANSI C12.20 -2010 class 0.2 clause 5.5.4 • EN 62053-22 -2003 class 0.2 accuracy clause 8 |
| Metering update rates | One update per line cycle, 1024 samples per cycle per channel |
| VG | Connect to power system earth ground only, This connection is a functional ground. |
| Energy functions | • ANSI C12.20 -2010 class 0.2 clause 5.5.4 • EN 62053-22 -2003 class 0.2 accuracy clause 8 |
Electrical
| Description | PowerMonitor 5000 M8 unit with native ethernet communication network |
|---|---|
| Ampere meter | Yes |
| Blind power meter | Yes |
| Frequency meter | Yes |
| Pulse counter | Yes |
| Voltmeter | Yes |
| Effective power measurement device | Yes |
Dimension
| Depth | 178 mm |
|---|
Logging Functions
| Time of use log | Yes |
|---|---|
| Energy log | Yes |
| Minimum/maximum log | Yes |
| Load factor log | Yes |
| Alarm log | Yes |
| Data log | Yes |
| Event log | Yes |
| Setpoint log | Yes |
| Power quality log | Yes |
| Waveform log | Yes |
| Trigger data log | Yes |
| Snapshot Log | Yes |
| Waveform synchronization broadcast (WSB) | Yes |
| Logical setpoint programming | Yes |
| EN 50160 weekly log | Yes |
| EN 50160 yearly log | Yes |
Communication
| EtherNet/IP | Yes |
|---|
There are no reviews yet.