-
MPL-B580F-MJ72AA, MP-Series MPL 480V AC Rotary Servo Motor
MXN $187,741.55MXN $187,741.55 (sin impuestos)× -
-
1492-CJK5-2, Center Jumper, Plug-In Type, 5 mm Center to Center, 2 Pole, Yellow, Pkg. Qty. of 60, for Use With 1492-L3, L3T, L3Q, L3P,
MXN $217.24MXN $217.24 (sin impuestos)× -
1492-P2T, Terminal Block, Push-in connection, IEC, Feed-Through, 1.5mm, Single Level, 3 Connection Points, Grey, Package Qty 50
MXN $231.90MXN $463.79 (sin impuestos)× -
-
1492-J4-G, Terminal Block, Screw Connection, Feed Through, 6.1 x 60 x 39.5mm (0.24 x 2.36 x 1.56 in), 1 Pole, Green, Pkg. Qty. of 100, VOLTAGE RATING UR - 600V AC/DC, CSA - 600V AC/DC, IEC - 800V AC/DC, ATEX 690V AC/DC, MAXIMUM CURRENT RATING UR - 35A, CSA - 25A,
MXN $226.72MXN $226.72 (sin impuestos)× -
9001BF201, Push button, Type B, standard duty control station, 5A, 600VAC, START/STOP, NEMA 1 flush mount
MXN $2,902.59MXN $2,902.59 (sin impuestos)×
1756-DNB, ControlLogix DeviceNet Comms Module
MXN $70,640.00 - (IVA Incluido) + Envío
8 disponibles
ControlLogix DeviceNet Comms Module
Marca:Allen-Bradley
Technical Specifications
Electrical
| Suitable for safety functions | Yes |
|---|---|
| With optical interface | No |
| Supporting protocol for TCP/IP | No |
| Supporting protocol for DeviceNet | Yes |
| Supporting protocol for other bus systems | No |
| Redundancy | No |
| IO link master | No |
| Supporting protocol for DeviceNet Safety | Yes |
| Supporting protocol for EtherNet/IP | No |
| Power dissipation | 3.5 W |
| Thermal dissipation | 11.9 BTU/h |
| Enclosure type rating | None (open-style) |
| Number of nodes, max | 64 nodes |
| DeviceNet current draw | 60 mA @ 24V DC |
| Current draw | 400 mA @ 5.1V DC, 0 mA @ 24V DC |
| Wiring category | 1 – On DeviceNet ports, 3 – On USB ports |
| Communication rate | 125 Kbps (500 m max), 250 Kbps (250 m max), 500 Kbps (100 m max) |
| Isolation voltage | 50V (continuous), basic insulation type, DeviceNet network to backplane, Type tested at 853V AC for 60 s, No isolation between USB and backplane, |
| Supporting protocol for LON | No |
| Supporting protocol for ASI | No |
| Supporting protocol for PROFIBUS | No |
| Supporting protocol for CAN | No |
| Supporting protocol for INTERBUS | No |
| Supporting protocol for KNX | No |
| Supporting protocol for Modbus | No |
| Supporting protocol for Data-Highway | No |
| Supporting protocol for SUCONET | No |
| With potential separation | No |
| Supporting protocol for SERCOS | No |
| Supporting protocol for INTERBUS-Safety | No |
| Radio standard Bluetooth | No |
| Radio standard Wi-Fi 802.11 | No |
| Supporting protocol for AS-Interface Safety at Work | No |
| Supporting protocol for Foundation Fieldbus | No |
| Supporting protocol for PROFINET CBA | No |
| Supporting protocol for PROFINET IO | No |
| Supporting protocol for PROFIsafe | No |
| Supporting protocol for SafetyBUS p | No |
| Radio standard GPRS | No |
| Radio standard GSM | No |
| Radio standard UMTS | No |
| Slot width | 1 |
| DeviceNet connector torque | 0.56 Nm |
| DeviceNet voltage range | 11…25V DC CL 2/SELV |
| DeviceNet port | 1 DeviceNet open-style 5- or 10-pin linear plug |
| DeviceNet power | To comply with the CE low voltage directive (LVD), the DeviceNet network must be powered from a source compliant with the safety extra low voltage (SELV) or protected extra low voltage (PELV). To comply with UL restrictions, the DeviceNet network must be |
Environmental
| Surrounding air temperature, max | 60 °C |
|---|---|
| Emissions | CISPR 11: Class A |
| Vibration | 2 G @ 10…500 Hz |
| ESD immunity | 6 kV contact discharges, 8 kV air discharges |
| EFT/B immunity | ±3 kV at 5 kHz on DeviceNet ports |
| Relative humidity | 5…95% noncondensing |
| Shock | Operating: 30 G, Non operating: 50 G |
| Conducted RF immunity | 10Vrms with 1 kHz sine-wave 80% AM from 150 kHz…80 MHz |
| Surge transient immunity | ±2 kV line-earth (CM) on ControlNet ports |
| Operating temperature | 0 to 60 °C |
| Radiated RF immunity | 10 V/m with 1 kHz sine-wave 80% AM from 80…2000 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz, 3 V/m with 1 kHz sine-wave 80% AM from 2000…2700 MHz |
| Storage temperature | -40 °C |
Certification
| North American temperature code | T4A |
|---|---|
| IEC temperature code | T4 |
Mechanical
| Module location | Chassis based, any slot |
|---|
| Peso | 0.365 kg |
|---|---|
| Dimensiones | 22.2 × 5.58 × 18.21 cm |
| Marcas | Allen-Bradley |
Marca
Allen-Bradley
Documentation
| RESOURCE | PUBLICATION NUMBER |
|---|---|
| Installation Instructions | 1756-IN566 |
Find more technical documentation for this product in the
Technical Documentation Center.
There are no reviews yet.