Technical Specifications
Construction
| With display | Yes |
|---|---|
| Readable | Yes |
| Housing material | Stainless steel |
| Position, nom | Process connection lower mount (LM) |
| Suitable for gases | Yes |
| Suitable for water | Yes |
| Suitable for steam | Yes |
| Suitable for air | Yes |
| Measuring element | Piezo |
| Sensor model | Standard |
| Connection type | 4 pin DC micro (M12) |
| Display | ≤±1% of span ±1 digit |
| Material | Wetted parts: process connection: Stainless Steel 316 L, pressure sensing elements: <9.8 bar: Stainless Steel 316 L, ≥9.8 bar: Stainless Steel 13-8 PH, non-wetted parts: housing: Stainless steel 304, keyboard: TPE-E, display window: Polycarbonate, display |
Mechanical
| Degree of protection (IP) | IP67 |
|---|---|
| Upper pressure range | 3600 psi (lbf/in²) |
| Pressure type | Gauge |
| Thread size | G 1/4 BSPP |
| Service life | 100000000 switching cycles |
| Shock | 50 G (1.76 oz) (IEC 60068-2-27, mechanical) |
| Ingress rating | IP65 and IP67. The stated ingress protection (per IEC 60529) only applies when plugged in with mating connectors that have the appropriate ingress protection |
| Zero offset adjustment | Maximum 3% of span |
Electrical
| Output signal | 4 – 20 mA |
|---|---|
| Power supply | 15…35V DC |
| Lower pressure range | 0 psi |
| Reverse polarity protection | V+ vs. V- |
| Output type | 1xPNP, 1x analog IO-link |
| Long term drift | ≤±0.2% of span (IEC 61298-2) |
| Load | Analog signal 4…20 mA: ≤0.5 kΩ |
| Non-linearity | ≤±0.5% of span (BFSL, IEC 61298-2) |
| Settling time | Switching output : 20 ms with IO-link |
| Current consumption | With IO-Link: maximum 450 mA including switching current |
| With temperature sensor | No |
| Cycle time, min | 3 ms |
| Data storage support | Yes |
| Overvoltage protection | 40V DC |
| Insulation voltage | 500V DC |
| IO-link protocol | Version 1.1 |
| Output voltage | Power supply -1 V |
| Rate | COM2 (38.4 k Baud) |
| Process data length | 16 bit (frame 2.2) |
| Short circuit protection | 4…20 mA, Out 1/Out 2 vs. V- |
| Output threshold | OUT 1 and OUT 2 are individually adjustable |
| Rated output current | With IO-link : OUT1 maximum 100 mA, OUT2 maximum 250 mA |
| Output mode | Selectable – normally open, normally closed, window, hysteresis |
| Switching output | Switch point accuracy: ≤±1% of span, adjustment accuracy: ≤±0.5% of span |
Environmental
| Operating temperature | 15 °F |
|---|---|
| Storage temperature | -20 °F |
| Atmospheric pressure | 950 mbar |
| Ambient temperature | -20 to 80 °C (-4 to 176 °F) |
| Temperature error | In rate temperature range: typical: ≤±1% of span, maximum: ≤±2.5% of span |
| Media | -20 °C |
| Humidity | 45…75 % r. h. |
| Vibration | 10 G (0.35 oz) (IEC 60068-2-6, under resonance) |
| Overpressure limit | 2 times. 1.7 times for the relative pressure measuring ranges 16 psi, 1000 psi, and 1500 psi |
| Temperature coefficient | In rated temperature range: mean TC zero point: ≤±0.2% of span/10 K (typical), mean TC span: ≤±0.1% of span/10 K (typical) |
There are no reviews yet.