Necesitas Ayuda?+52 55 61 22 77 00
Correo: ventas@omegaautomation.com.mx

ATV212HU40M3X variable speed drive ATV212 – 4kW – 5hp – 240V – 3ph – wo EMC – IP21

USD $1,225.14 - (IVA Incluido) + Envío

Sin existencias

This Altivar 212 variable speed drive can feed 3-phase asynchronous motors. Its protection index is IP21. It works at a rated power up to 4kW / 5hp and a rated voltage from 200V to 240V AC. Its design is based on eco-energy with a reduction in energy consumption of up to 70% compared to a conventional control system. Thanks to its cable temperature rise reduction technology, the Altivar 212 drive offers immediate, disturbance-free operation avoiding additional options such as a line choke or DC choke to deal with current harmonics. It weighs 3.05kg and its dimensions are, 142mm wide, 184mm high, 150mm deep. It is specifically designed for the most common fluid management applications in tertiary sector buildings (HVAC) like heating, ventilation, air conditioning and pumping. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, C-Tick and NOM certified. The Altivar 212 offers optional motor chokes which can increase the maximum cable lengths between the drive and the motor and limit disturbance at the motor terminals. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. The Altivar 212 drive can easily be adapted to all building management systems thanks to its numerous functions and communication protocols integrated as standard, Modbus, METASYS N2, APOGEE FLN P1 and BACnet.

SKU: ATV212HU40M3X

variable speed drive, Altivar 212, 4kW, 5hp, 240V, 3 phases, without EMC, IP21

ATV212HU40M3X

Main
Device short name ATV212
product destination Asynchronous motors
Phase 3 phase
Motor power kW 4 kW
Maximum Horse Power Rating 5 hp
Supply voltage limits 170…264 V
Supply frequency 50…60 Hz – 5…5 %
Line current 13 A 240 V
15.7 A 200 V
Range of Product Altivar 212
Product or Component Type Variable speed drive
Product Specific Application Pumps and fans in HVAC
Communication Port Protocol LonWorks
METASYS N2
APOGEE FLN
Modbus
BACnet
[Us] rated supply voltage 200…240 V – 15…10 %
EMC filter Without EMC filter
IP degree of protection IP21
Complementary
Apparent power 6.7 kVA 240 V
Continuous output current 17.5 A 230 V
Maximum transient current 19.3 A 60 s
Speed drive output frequency 0.5…200 Hz
Speed range 1…10
Speed accuracy +/- 10 % of nominal slip 0.2 Tn to Tn
Local signalling for DC bus energized 1 LED (red)
Output voltage <= power supply voltage
Isolation Electrical between power and control
Type of cable Without mounting kit 1 IEC cable 113 °F (45 °C), copper 90 °C / XLPE/EPR
Without mounting kit 1 IEC cable 113 °F (45 °C), copper 70 °C / PVC
With UL Type 1 kit 3 UL 508 cable 104 °F (40 °C), copper 75 °C / PVC
Electrical connection VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 0.00 in² (2.5 mm²) / AWG 14
L1/R, L2/S, L3/T terminal 0.01 in² (6 mm²) / AWG 10
Tightening torque 11.51 lbf.in (1.3 N.m), 11.5 lb.in L1/R, L2/S, L3/T)
5.31 lbf.in (0.6 N.m) VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)
Supply Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 A overload and short-circuit protection
Internal supply 24 V DC 21…27 V), <200 A overload and short-circuit protection
Sampling duration 2 ms +/- 0.5 ms F discrete
2 ms +/- 0.5 ms R discrete
2 ms +/- 0.5 ms RES discrete
3.5 ms +/- 0.5 ms VIA analog
22 ms +/- 0.5 ms VIB analog
Response time FM 2 ms +/- 0.5 ms analog
FLA, FLC 7 ms +/- 0.5 ms discrete
FLB, FLC 7 ms +/- 0.5 ms discrete
RY, RC 7 ms +/- 0.5 ms discrete
Accuracy +/- 0.6 % VIA) for a temperature variation 60 °C
+/- 0.6 % VIB) for a temperature variation 60 °C
+/- 1 % FM) for a temperature variation 60 °C
Linearity error VIA +/- 0.15 % of maximum value input
VIB +/- 0.15 % of maximum value input
FM +/- 0.2 % output
Analogue output type FM switch-configurable voltage 0…10 V DC 7620 Ohm 10 bits
FM switch-configurable current 0…20 mA 970 Ohm 10 bits
Discrete output type Configurable relay logic FLA, FLC) NO – 100000 cycles
Configurable relay logic FLB, FLC) NC – 100000 cycles
Configurable relay logic RY, RC) NO – 100000 cycles
Minimum switching current 3 mA 24 V DC configurable relay logic
Maximum switching current 5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R)
5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R)
2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R)
2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R)
Discrete input type F programmable 24 V DC level 1 PLC 4700 Ohm
R programmable 24 V DC level 1 PLC 4700 Ohm
RES programmable 24 V DC level 1 PLC 4700 Ohm
Discrete input logic Positive logic (source) F, R, RES), <= 5 V, >= 11 V
Negative logic (sink) F, R, RES), >= 16 V, <= 10 V
Dielectric strength 2830 V DC between earth and power terminals
4230 V DC between control and power terminals
Insulation resistance >= 1 mOhm 500 V DC for 1 minute
Frequency resolution Display unit 0.1 Hz
Analog input 0.024/50 Hz
communication service Read device identification (43)
Write single register (06)
Read holding registers (03) 2 words maximum
Time out setting from 0.1 to 100 s
Write multiple registers (16) 2 words maximum
Monitoring inhibitable
Option card Communication card LonWorks
Power dissipation in W 193 W
Air flow 17435.67 Gal/hr(US) (66 m3/h)
Specific application HVAC
Variable speed drive application selection Building – HVAC compressor for scroll
Building – HVAC fan
Building – HVAC pump
Motor power range AC-3 4…6 kW 200…240 V 3 phase
Motor starter type Variable speed drive
Discrete output number 2
Analogue input number 2
Analogue input type VIA switch-configurable voltage 0…10 V DC 24 V max 30000 Ohm 10 bits
VIB configurable voltage 0…10 V DC 24 V max 30000 Ohm 10 bits
VIB configurable PTC probe 0…6 probes 1500 Ohm
VIA switch-configurable current 0…20 mA 250 Ohm 10 bits
Analogue output number 1
Physical interface 2-wire RS 485
Connector Type 1 RJ45
1 open style
Transmission Rate 9600 bps or 19200 bps
Transmission frame RTU
Number of addresses 1…247
Data format 8 bits, 1 stop, odd even or no configurable parity
Type of polarization No impedance
Asynchronous motor control profile Voltage/frequency ratio, 2 points
Voltage/frequency ratio, 5 points
Flux vector control without sensor, standard
Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo)
Voltage/frequency ratio – Energy Saving, quadratic U/f
Torque accuracy +/- 15 %
Transient overtorque 120 % of nominal motor torque +/- 10 % 60 s
Acceleration and deceleration ramps Linear adjustable separately from 0.01 to 3200 s
Automatic based on the load
Motor slip compensation Automatic whatever the load
Not available in voltage/frequency ratio motor control
Adjustable
Switching frequency 6…16 kHz adjustable
12…16 kHz with derating factor
Nominal switching frequency 12 kHz
Braking to standstill By DC injection
Network Frequency 47.5…63 Hz
Prospective line Isc 5 kA
Protection type Overheating protection drive
Thermal power stage drive
Short-circuit between motor phases drive
Input phase breaks drive
Overcurrent between output phases and earth drive
Overvoltages on the DC bus drive
Break on the control circuit drive
Against exceeding limit speed drive
Line supply overvoltage and undervoltage drive
Line supply undervoltage drive
Against input phase loss drive
Thermal protection motor
Motor phase break motor
With PTC probes motor
Width 5.59 in (142 mm)
Height 7.24 in (184 mm)
Depth 5.91 in (150 mm)
Net Weight 6.72 lb(US) (3.05 kg)
Environment
Pollution degree 3 IEC 61800-5-1
IP degree of protection IP20 on upper part without blanking plate on cover IEC 61800-5-1
IP20 on upper part without blanking plate on cover IEC 60529
IP21 IEC 61800-5-1
IP21 IEC 60529
IP41 on upper part IEC 61800-5-1
IP41 on upper part IEC 60529
Vibration resistance 1.5 mm 3…13 Hz)IEC 60068-2-6
1 gn 13…200 Hz)EN/IEC 60068-2-8
Shock resistance 15 gn 11 ms IEC 60068-2-27
Environmental characteristic Classes 3C1 IEC 60721-3-3
Classes 3S2 IEC 60721-3-3
Noise level 51 dB 86/188/EEC
Operating altitude 3280.84…9842.52 ft (1000…3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m
<= 3280.84 ft (1000 m) without derating
Relative humidity 5…95 % without condensation IEC 60068-2-3
5…95 % without dripping water IEC 60068-2-3
Ambient air temperature for operation 14…104 °F (-10…40 °C) without derating)
104…122 °F (40…50 °C) with derating factor)
Operating position Vertical +/- 10 degree
Product Certifications UL
CSA
NOM 117
C-tick
marking CE
Standards IEC 61800-3 environments 1 category C2
IEC 61800-3 environments 2 category C2
IEC 61800-3 environments 2 category C1
UL Type 1
IEC 61800-3 environments 2 category C3
IEC 61800-5-1
IEC 61800-5-1
IEC 61800-3 environments 1 category C1
IEC 61800-3
IEC 61800-3 environments 1 category C1
IEC 61800-3 environments 1 category C3
IEC 61800-3 environments 2 category C3
IEC 61800-3
IEC 61800-3 environments 1 category C3
IEC 61800-3 environments 1 category C2
IEC 61800-3 environments 2 category C1
IEC 61800-3 environments 2 category C2
Assembly style With heat sink
Electromagnetic compatibility Electrostatic discharge immunity test level 3 IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 IEC 61000-4-4
1.2/50 µs – 8/20 µs surge immunity test level 3 IEC 61000-4-5
Conducted radio-frequency immunity test level 3 IEC 61000-4-6
Voltage dips and interruptions immunity test IEC 61000-4-11
Regulation loop Adjustable PI regulator
Ambient Air Temperature for Storage -13…158 °F (-25…70 °C)
Ordering and shipping details
Category US1CP4D22155
Discount Schedule CP4D
GTIN 3606480322365
Returnability Yes
Country of origin FR
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 9.65 in (24.5 cm)
Package 1 Width 9.65 in (24.5 cm)
Package 1 Length 9.65 in (24.5 cm)
Package 1 Weight 6.24 lb(US) (2.83 kg)
Unit Type of Package 2 P06
Number of Units in Package 2 12
Package 2 Height 29.53 in (75 cm)
Package 2 Width 23.62 in (60 cm)
Package 2 Length 31.50 in (80 cm)
Package 2 Weight 103.53 lb(US) (46.96 kg)
Contractual warranty
Warranty 18 months
Peso 2.83 kg
Dimensiones 24.5 × 24.5 × 24.5 cm
Marcas

Schneider Electric

Marca

Schneider Electric

Product Datasheet
User guide
Instruction Sheet
Catalog
Environmental Disclosure

Customers reviews

There are no reviews yet.

Be the first to review “ATV212HU40M3X variable speed drive ATV212 – 4kW – 5hp – 240V – 3ph – wo EMC – IP21”

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

Search for products

Back to Top
Elegir Moneda
USD Dólar de los Estados Unidos (US)
Product has been added to your cart