| Communication |
EtherNet/IP |
| Short circuit protection |
25 A rated device |
| DeviceNet input current surge |
15 A for 250 µs |
| DeviceNet input current |
364mA @ 11V DC – 4.0 W |
| Total w/max. sensor inputs (4) |
367mA @ 24V DC – 8.0 W |
| Overvoltage category |
Control circuit: III per IEC |
| Product type |
AC Drive |
| Rated impulse voltage |
Power circuit: rated 6 kV |
| DeviceNet supply voltage rating |
Range 11…25V DC @ 24V DC Nominal |
| Baud rates |
125, 250, 500 kbps |
| Rated input operation voltage |
24V DC |
| Input OFF-state current |
<1.5 mA |
| Rated output operating current, max |
Power circuit: 7.6 A @ 3-phase, 5 Hp rating |
| Input OFF-state voltage |
0…5V DC |
| Input ON-state voltage |
10…26V DC |
| Torque performance mode |
Sensorless vector control and volts per Hz |
| Distance, max |
500 m (1630 ft) @ 125 kbps |
| Operating frequency |
Power circuit: 50/60 Hz |
| Input ON-state current |
7.2mA @ 24V DC |
| Number of contacts |
Output rating- sourced from control circuit: 2 |
| Short-circuit protection device list |
Size per NEC group motor per UL/NEMA |
| Input compatibility |
IEC 1133 Type 1+ |
| Application in industrial area permitted (SCPD list) |
Size per NFPA 70 (NEC) or NFPA 79 for group motor applications |
| Rated output operation voltage |
Sourced from control circuit: 240V AC / 30V DC |
| Drive input current ratings |
12.5A @ 460V, 5 Hp, 3-phase, 60 Hz |
| Insulation voltage |
Power circuit: rated 600V AC |
| Dielectric withstand |
Power circuit: 2500V AC per IEC |
| Type of contacts |
Output rating- sourced from control circuit: normally open (NO) |
| Outputs current (2) 1 A each, max |
External devices powered by control voltage: 2 A @ with brake and output contactor |
| Current available |
Sensor source: 50 mA maximum per input, 200 mA total |
| Type of control circuit |
Output rating- sourced from control circuit: electromechanical relay |
| Conventional thermal current (Ith) |
Output rating- sourced from control circuit: total of both outputs ≤2 A |
| RMS symmetrical amperes |
30 kA @ 600Y/347V per IEC |
| Rated operation voltage |
Power circuit: 380Y/220…480Y/277V AC |
| 3-phase power/motor cable connection |
Conduit entrance with motor cable |
| Input filter – software selectable |
ON to OFF: settable from 0…64 ms in 1 ms increments |
| Kind of current |
Output rating- sourced from control circuit: AC/DC |
| Nominal control power (pick up) |
External devices powered by control voltage: 64 W @ with maximum outputs, with brake and output contactor |
| Nominal control power (hold in) |
External devices powered by control voltage: 64 W @ with maximum outputs, with brake and output contactor |
| Trip class |
Class 10 |
| Number of digital inputs |
4 |
| Number of digital outputs |
2 |
| Number of analogue inputs |
4 |
| Max. output frequency |
400 Hz |
| Supporting protocol for EtherNet/IP |
True |
| Mains frequency |
50/60 Hz |
| Number of inputs |
4 |
| Enclosure type |
IP67/NEMA 4 |
| Disconnect |
Motor disconnect |
| Connection type |
Quick disconnects |
| Utilization category |
Power circuit: AC-3 per IEC |
| External devices powered by DeviceNet |
50 mA – total 200 mA |
| Voltage status |
Sensor source: 11…25V DC from DeviceNet |
| Overload protection |
I²t overload protection – 150% @ 60s, 200% @ 30s |
There are no reviews yet.