| Number of analogue inputs |
4 |
| Input, current |
True |
| Input, voltage |
True |
| Input, resistor |
True |
| Input, resistance thermometer |
True |
| Input, thermocouple |
True |
| Output, current |
False |
| Output, voltage |
False |
| Analogue inputs configurable |
True |
| Analogue outputs configurable |
False |
| Type of electric connection |
Screw-/spring clA connection |
| Local CJC sensor accuracy |
±0.3 °C |
| Input range, current |
0…20mA @ 4….20mA |
| Remote CJC sensor accuracy |
Based on specified thermistor: ±0.3 °C |
| RTD excitation current |
600 µA, 3 wire mode, 100 µA, 2 wire mode |
| Module keying |
Electronic keying via progming software |
| Scan time |
Per channel: 625 µs, Per group: 2.5 ms |
| Step response time to 63% of value |
7.5 ms (Notch filter 10 kHz) |
| Module conversion method |
Sigma-Delta, One 24-bit multiplexed ADC |
| RTB torque |
5069-RTB18-SCREW, 5069-RTB14CJC-SCREW: 0.4 Nm (3.5 lbin) |
| Overvoltage protection, max |
Voltage, current, RTD, and thermocouple/mV modes: ±30V DC |
| Common mode voltage |
±10V (Current mode and 3-wire RTD mode), ±2V (Voltage mode) |
| Data format |
IEEE 32-bit floating point |
| Wire category |
2 – shielded input ports, 2 – power ports, 1 wire per terminal for each signal port |
| Power dissipation, max |
Voltage mode: 1.8 W, Current mode: 2.1 W, RTD mode: 2.1 W, Thermocouple / mvolt mode: 1.8 W |
| Indicators |
1 green/red module status indicator, 4 yellow/red I/O status indicators, 2 yellow/red CJC status indicators |
| Thermal dissipation, max |
Voltage mode: 6.1 BTU/hr, Current mode: 7.2 BTU/hr, RTD mode: 7.2 BTU/hr, Thermocouple/mvolt: 6.1 BTU/hr |
| Accuracy drift with temperature |
Voltage: 0.200% full scale, Current: 0.300% full scale, RTD: 0.200% full scale, Thermocouple/mvolt: 0.200% full scale |
| Input Total Unadjusted Error (TUE) |
Voltage: 0.300% full Scale, Current: 0.400% full Scale, RTD: 0.300% full Scale, Thermocouple/mvolt: 0.300% full Scale |
| Inputs |
4 differential |
| Wire size |
5069-RTB18-SPRING and 5069-RTB14CJCSPRING connections: 0.5…1.5 mm² (22…16 AWG) solid or stranded shielded copper wire rated at 105 °C (221 °F), or greater, 2.9 mm (0.11 in.), max diam including insulation, single wire connection only, 5069-RTB18-S |
| Calibrated accuracy |
Voltage: 0.100% full scale @ 25 °C Current: 0.100% full scale @ 25 °C RTD: 0.100% full scale @ 25 °C Thermocouple/mvolt: 0.100% full scale @ 25 °C |
| Suitable for safety functions |
False |
| Notch filter frequency at RPI of 2.5 ms, min |
10 khz |
| Input anti-aliasing filter cutoff frequency, typical |
500 Hz |
| Onboard data alarming |
True |
| Scaling to engineering units |
True |
| Real-time channel sampling |
True |
| Thermocouple linearization |
ITS-90 |
| Input range, thermocouple / millivolt |
±100 mV |
| Common mode noise rejection ratio |
130 dB @ 50/60 Hz |
| Overcurrent protection, max |
Current mode: ±30 mA |
| Input range, voltage |
±10V @ 0…10V, 0…5V |
| Notch filter at minimum RPI |
62.5 kHz (0.2 ms, 1 channel enabled) |
| Input type, thermocouple |
B, C, D, E, J, K, L (TXK/XK), N, R, S, T |
| Normal mode noise rejection ratio |
65 dB @ 50/60 Hz, notch filter dependent |
| Input digital filter |
First order lag, 0 ms…32,767 ms (32.767 s) |
| Input range, resistive |
1…500 Ω, 2…1000 Ω, 4…2000 Ω, 8…4000 Ω |
| Calibration methods |
Factory calibrated, User-performed (optional) |
| Data value during overload condition |
Full scale, overrange flag, Data uncertain / data bad |
| Resolution, thermocouple / millivolt |
16 bit at 10 Hz notch filter: <3.1 µV/cnt in ±100 mV mode |
| Wire impedance |
25 Ω maximum for specified accuracy (3-wire RTD mode only) |
| HART handheld compliance |
Add an external 250 Ω resistor into the current loop for HART transmitter compliance |
| Insulation stripping length |
5069-RTB18-SPRING connections: 10 mm (0.39 in.), 5069-RTB18-SCREW connections: 12 mm (0.47 in.) |
| Resolution, current |
16 bit at 10 Hz notch filter: 0…21 mA: <0.32 µA/count (16 bit), 3.6…21 mA: <0.27 µA/count (16 bit) |
| Input notch filter (Hz) selections |
5, 10 (50/60 default), 15, 20, 50, 60, 100, 200, 500, 1000, 2500, 5000, 10000, 15625, 25000, 31250, 62500 |
| Open circuit detection time, nom |
Voltage: + full scale, <2 s, Current: 4…20 mA range, <2 s, RTD: <2 s, Thermocouple / mvolt: + full scale, <10 s |
| Input type, RTD |
100, 200, 500, 1000 Ω platinum, alpha=385, 100, 200, 500, 1000 Ω platinum, alpha=3916, 120 Ω nickel, alpha=672, 100, 120, 200, 500 Ω nickel, alpha=618, 10 Ω copper 427 |
| Resolution, voltage |
16 bit at 10 Hz notch filter: ±10.5V: <320 µV/count (15 bit plus sign bipolar), 0…10.5V: <160 µV/count (16 bit unipolar), 0…5.25V: <80 µ/V count (16 bit unipolar) |
| Resolution, RTD |
(16 bit at 10 Hz notch filter) 3 wire mode: <7.9 mΩ/cnt in 1…500 Ω mode, <15.8 mΩ/cnt in 2…1000 Ω mode, <31.7 mΩ/cnt in 4…2000 Ω mode, <63.4 mΩ/cnt in 8…4000 Ω mode |
| CJC inputs |
Two CJC sensors, 2 thermistors embedded in 5069-RTB14CJC-(screw or spring) RTB, -or- 2 thermistors wired to 5069-RTB18-(screw or spring) RTB, Thermistor type: Measurement specialties, Inc. 10K3A1A, (for thermocouple mode use only) |
| RTD sensor types/temperature range |
100, 200, 500, 1000 Ω PT 385: -200…870 °C, -328…1598 °F, 73…1143 °K, 132…2058 °R, 100, 200, 500, 1000 Ω PT 3916: -200…630 °C, -328…1166 °F, 73…903 °K, 132…1626 °R, 10 Ω CU 247: -200…260 °C, -328…500 °F, 73…533 °K, 132…960 °R, |
| Thermocouple type/temperature range |
Thermocouple Type B: 21…1820 °C, 68…3308 °F, 293…2093 °K, 528…3768 °R, Thermocouple Type C: 0…2320 °C, 32…4208 °F, 273…2593 °K, 492…4668 °R, Thermocouple Type D: 0…2320 °C, 32…4208 °F, 273…2593 °K, 492…4668 °R, Thermocouple Type E: -270…1000 °C, -454…18 |
There are no reviews yet.