20DD052A0EYNANANE, PowerFlex 700S AC Drive 52 A 40 Hp 20D
MXN $176,597.00 - (IVA Incluido) + Envío
Sin existencias
PowerFlex 700S AC Drive 52 A 40 Hp 20D
Marca:Rockwell Automation
| Brake Resistor | No Internal |
|---|---|
| Filter Options | W/ EMC Filt & ComModeChoke |
| Product Family | PowerFlex 700S AC Drive |
| Degree of protection (IP) | IP20 |
|---|---|
| Shock | 10 G peak for 11 ms duration (±1.0 ms) |
| PWM frequency | 4 kHz @ 650V DC |
| Vibration | 0.152 mm (0.006 in.) displacement, 1 G peak, 5.5 Hz |
| Number of analogue outputs | 2 |
|---|---|
| Mains voltage | 480 |
| Integrated breaking resistance | No |
| Max. output voltage | 932 |
| DC bus overvoltage trip | 810V DC @ 480V |
| DC nominal bus voltage | 648V DC @ 480V |
| Brake IGBT | Brake IGBT installed |
| Internal communication module | No communication module |
| Fuse current rating | 90A @ 650V DC |
| Input voltage rating | 480V AC, 3-phase, 60 Hz |
| Displacement power factor | 0.98 across speed range |
| Output current, continuous | 52A @ 650V DC |
| Output current, 1 min | 60A @ 650V DC |
| Output current, 3 sec | 80A @ 650V DC |
| Circuit breaker current rating, max | 200A @ 480V AC, 3-phase |
| Motor circuit protector current rating, max | 70A @ 480V AC, 3-phase |
| Logic control ride-thru | 0.25 s, drive not running |
| Brake resistor | No internal brake resistor |
| Input current rating | 55.7A @ 650V DC |
| Rated power rating | 40Hp @ 650V DC, normal duty |
| Documentation | English documentation |
| Carrier frequency | Drive rating: 4 kHz, settings: 2, 4, 6, 8, 10 kHz (6 kHz is for V/Hz ops only) |
| AC input overvoltage trip | 600V AC @ 480V (six pulse, 3-phase) |
| Input power rating | 39.7 kVA @ 480V AC, 3-phase |
| Electronic motor overload protection | Class 10 motor overload protection according to NEC article 430 and motor over-temperature protection according to NEC article 430.126 (A)(2). UL 508C file E59272 |
| Dual element time delay fuse current rating | 60…110A @ 480V AC, 3-phase |
| Non-time delay fuse current rating | 60…200A @ 480V AC, 3-phase |
| Heat sink thermistor | Monitored by microprocessor overtemperature trip |
| Drive to motor power ratio, max | The drive to motor rating cannot exceed a 2:1 ratio |
| Stop modes | Multiple progmable stop modes including – RA, Coast, and Current Limit |
| Acceleration/deceleration | Independently progmable accel and decel times adjustable from 0 to 6553.5 in 0.1 s increments |
| Number of digital inputs | 6 |
| Number of digital outputs | 2 |
| Number of analogue inputs | 3 |
| Motor voltage, nom | 460V @ 380…400V drive rating, 480V nominal line voltage |
| Human interface model | No HIM (no blank plastic inserted) |
| Additional configuration | Phase II control |
| Max. output frequency | 400 |
| Line voltage, nom | 480V @ 380…400V drive rating, 460V nominal motor voltage |
| Mains frequency | 60 Hz |
| Internal EMC filtering | With EMC filter & common mode choke |
| Watt loss | 708 W @ 480V AC @ 40Hp normal duty, 30 Hp heavy duty |
| Feedback option | Future use |
| Drive full power range | 460…528V @ 380…400V drive rating, 460V nominal motor voltage |
| Drive operating range | 325…528V @ 380…400V drive rating, 460V nominal motor voltage |
| Torque regulation | Torque regulation – without ftdback: ±5%, 600 rad/sec bandwidth |
| Enclosure type | IP20/NEMA/UL Type 1 |
| Output current rating | 52 A, 40 Hp normal duty, 30 Hp heavy duty, frame 3 |
| Control options | Phase II control, expanded cassette |
| Drive overcurrent trip | Software current limit: 105% of motor rated to 200% of drive rated current |
| Efficiency | 97.5% at rated A, nominal line volts |
| Speed control | Speed regulation – without ftdback: 0.1% of base speed across 120:1 speed range, 120:1 operating range, 50 rad/sec bandwidth |
| Current limit capability | Independent motoring and regenerative power limits progmable to 800% of rated output current |
| Selectable motor control | Field oriented control with and without a ftdback device and permanent magnet motor control |
| Input phases | Six-pulse, 3-phase input provides full rating for all drives, single-phase ops provides 50% of rated current |
| Control method | Induction motor and brushless motor: sine coded PWM with progmable carrier frequency, indirect self organized, field-oriented control, current-regulated, ratings apply to all drives, refer to the PowerFlex 700S Phase ll control reference manual, public |
| Number of phases output | 3 |
| Number of phases input | 3 |
| Relative symmetric net voltage tolerance | 10 |
| Input frequency, max | 400 |
| Output frequency range | 0 |
| DC bus undervoltage trip | Adjustable |
| Output voltage range | 0 to rated motor voltage |
| Power ride-thru | 15 ms at full load |
| S-curve time | Adjustable 0.5…4.0 s |
| Short circuit trip | Phase-to-phase on drive output |
| Ground fault trip | Phase-to-ground on drive output |
| Control logic noise immunity | Showering arc transients upto 1500V peak |
| Line transients | Up to 6000 volts peak per IEEE C62.41-1991 |
| Intermittent overload | 110% overload capability for up to 1 min, 150% overload capability for up to 3 s |
| Short circuit current, max | Using recommended fuse or circuit breaker type: maximum short circuit current rating to match specified fuse/circuit breaker capability ≤200000 A |
| Encoder voltage supply | 5V DC or 12V DC 320 mA/channel, 5V DC minimum high state voltage state of 0.4V DC @ 12V DC minimum high state voltage of 7.0V DC, maximum low state voltage of 0.4V DC |
| Height, approx | 517.5 mm |
|---|---|
| Depth, approx | 200 mm |
| Width, approx | 253.9 mm |
| Weight, approx | Drive: 18.55 kg |
| Sound level | Frame 3: 61 dB @ 120 CFM fan speed |
|---|---|
| Altitude | 1000 m (3300 ft.) maximum without derating |
| Degree of protection (NEMA) | 1 |
| Atmosphere | Drive must not be installed in an area where the ambient atmosphere contains volatile or corrosive gas, vapors, or dust, If the drive is not going to be installed for a period of time, it must be stored in an area where it will not be exposed to a corrosi |
| Operating temperature | 50 °C @ 650V DC |
| Storage temperature | -40 |
| Relative humidity | 5…95% noncondensing |
| Surrounding air temperature without derating | NEMA/UL Type 1: 0° to 40° C (32° to 104° F) |
| Peso | 21.06 kg |
|---|---|
| Dimensiones | 73 × 40.58 × 33.6 cm |
| Marcas | Allen-Bradley |
Marca
Rockwell Automation
| Type | Resource | Publication |
|---|---|---|
| General | PowerFlex 700S AC Drives with Phase II Control Reference Manual | PFLEX-RM003 |
| General | Product Cutsheet | -- |
| General | Product Profile | -- |
| General | User Manual | 20D-UM006 |
| General | Technical Data | -- |
| General | PowerFlex 700S with Phase I Control Reference Manual | PFLEX-RM002 |
| Installation Instructions | 20d-in024_-en-p | 20D-IN024 |
| Technical Data | 20d-td002_-en-p | 20D-TD002 |
| User Manual | 20d-um001_-en-p | 20D-UM001 |
|
PowerFlex 700S AC Drives with Phase II Control Reference Manual
General
PFLEX-RM003 |
|
Product Cutsheet
General
-- |
|
Product Profile
General
-- |
|
User Manual
General
20D-UM006 |
|
Technical Data
General
-- |
|
PowerFlex 700S with Phase I Control Reference Manual
General
PFLEX-RM002 |
|
20d-in024_-en-p
Installation Instructions
20D-IN024 |
|
20d-td002_-en-p
Technical Data
20D-TD002 |
|
20d-um001_-en-p
User Manual
20D-UM001 |
There are no reviews yet.