Name: 20DD052A0EYNANANE, PowerFlex 700S AC Drive 52 A 40 Hp 20D
SKU: 20DD052A0EYNANANE
Availability: OutOfStock

Brake Resistor	No Internal
Filter Options	W/ EMC Filt & ComModeChoke
Product Family	PowerFlex 700S AC Drive

Degree of protection (IP)	IP20
Shock	10 G peak for 11 ms duration (±1.0 ms)
PWM frequency	4 kHz @ 650V DC
Vibration	0.152 mm (0.006 in.) displacement, 1 G peak, 5.5 Hz

Number of analogue outputs	2
Mains voltage	480
Integrated breaking resistance	No
Max. output voltage	932
DC bus overvoltage trip	810V DC @ 480V
DC nominal bus voltage	648V DC @ 480V
Brake IGBT	Brake IGBT installed
Internal communication module	No communication module
Fuse current rating	90A @ 650V DC
Input voltage rating	480V AC, 3-phase, 60 Hz
Displacement power factor	0.98 across speed range
Output current, continuous	52A @ 650V DC
Output current, 1 min	60A @ 650V DC
Output current, 3 sec	80A @ 650V DC
Circuit breaker current rating, max	200A @ 480V AC, 3-phase
Motor circuit protector current rating, max	70A @ 480V AC, 3-phase
Logic control ride-thru	0.25 s, drive not running
Brake resistor	No internal brake resistor
Input current rating	55.7A @ 650V DC
Rated power rating	40Hp @ 650V DC, normal duty
Documentation	English documentation
Carrier frequency	Drive rating: 4 kHz, settings: 2, 4, 6, 8, 10 kHz (6 kHz is for V/Hz ops only)
AC input overvoltage trip	600V AC @ 480V (six pulse, 3-phase)
Input power rating	39.7 kVA @ 480V AC, 3-phase
Electronic motor overload protection	Class 10 motor overload protection according to NEC article 430 and motor over-temperature protection according to NEC article 430.126 (A)(2). UL 508C file E59272
Dual element time delay fuse current rating	60…110A @ 480V AC, 3-phase
Non-time delay fuse current rating	60…200A @ 480V AC, 3-phase
Heat sink thermistor	Monitored by microprocessor overtemperature trip
Drive to motor power ratio, max	The drive to motor rating cannot exceed a 2:1 ratio
Stop modes	Multiple progmable stop modes including – RA, Coast, and Current Limit
Acceleration/deceleration	Independently progmable accel and decel times adjustable from 0 to 6553.5 in 0.1 s increments
Number of digital inputs	6
Number of digital outputs	2
Number of analogue inputs	3
Motor voltage, nom	460V @ 380…400V drive rating, 480V nominal line voltage
Human interface model	No HIM (no blank plastic inserted)
Additional configuration	Phase II control
Max. output frequency	400
Line voltage, nom	480V @ 380…400V drive rating, 460V nominal motor voltage
Mains frequency	60 Hz
Internal EMC filtering	With EMC filter & common mode choke
Watt loss	708 W @ 480V AC @ 40Hp normal duty, 30 Hp heavy duty
Feedback option	Future use
Drive full power range	460…528V @ 380…400V drive rating, 460V nominal motor voltage
Drive operating range	325…528V @ 380…400V drive rating, 460V nominal motor voltage
Torque regulation	Torque regulation – without ftdback: ±5%, 600 rad/sec bandwidth
Enclosure type	IP20/NEMA/UL Type 1
Output current rating	52 A, 40 Hp normal duty, 30 Hp heavy duty, frame 3
Control options	Phase II control, expanded cassette
Drive overcurrent trip	Software current limit: 105% of motor rated to 200% of drive rated current
Efficiency	97.5% at rated A, nominal line volts
Speed control	Speed regulation – without ftdback: 0.1% of base speed across 120:1 speed range, 120:1 operating range, 50 rad/sec bandwidth
Current limit capability	Independent motoring and regenerative power limits progmable to 800% of rated output current
Selectable motor control	Field oriented control with and without a ftdback device and permanent magnet motor control
Input phases	Six-pulse, 3-phase input provides full rating for all drives, single-phase ops provides 50% of rated current
Control method	Induction motor and brushless motor: sine coded PWM with progmable carrier frequency, indirect self organized, field-oriented control, current-regulated, ratings apply to all drives, refer to the PowerFlex 700S Phase ll control reference manual, public
Number of phases output	3
Number of phases input	3
Relative symmetric net voltage tolerance	10
Input frequency, max	400
Output frequency range	0
DC bus undervoltage trip	Adjustable
Output voltage range	0 to rated motor voltage
Power ride-thru	15 ms at full load
S-curve time	Adjustable 0.5…4.0 s
Short circuit trip	Phase-to-phase on drive output
Ground fault trip	Phase-to-ground on drive output
Control logic noise immunity	Showering arc transients upto 1500V peak
Line transients	Up to 6000 volts peak per IEEE C62.41-1991
Intermittent overload	110% overload capability for up to 1 min, 150% overload capability for up to 3 s
Short circuit current, max	Using recommended fuse or circuit breaker type: maximum short circuit current rating to match specified fuse/circuit breaker capability ≤200000 A
Encoder voltage supply	5V DC or 12V DC 320 mA/channel, 5V DC minimum high state voltage state of 0.4V DC @ 12V DC minimum high state voltage of 7.0V DC, maximum low state voltage of 0.4V DC

Height, approx	517.5 mm
Depth, approx	200 mm
Width, approx	253.9 mm
Weight, approx	Drive: 18.55 kg

Sound level	Frame 3: 61 dB @ 120 CFM fan speed
Altitude	1000 m (3300 ft.) maximum without derating
Degree of protection (NEMA)	1
Atmosphere	Drive must not be installed in an area where the ambient atmosphere contains volatile or corrosive gas, vapors, or dust, If the drive is not going to be installed for a period of time, it must be stored in an area where it will not be exposed to a corrosi
Operating temperature	50 °C @ 650V DC
Storage temperature	-40
Relative humidity	5…95% noncondensing
Surrounding air temperature without derating	NEMA/UL Type 1: 0° to 40° C (32° to 104° F)

Show More Show Less

Peso	21.06 kg
Dimensiones	73 × 40.58 × 33.6 cm
Marcas	Allen-Bradley

Marca

Rockwell Automation

Type	Resource	Publication
General	PowerFlex 700S AC Drives with Phase II Control Reference Manual	PFLEX-RM003
General	Product Cutsheet	--
General	Product Profile	--
General	User Manual	20D-UM006
General	Technical Data	--
General	PowerFlex 700S with Phase I Control Reference Manual	PFLEX-RM002
Installation Instructions	20d-in024_-en-p	20D-IN024
Technical Data	20d-td002_-en-p	20D-TD002
User Manual	20d-um001_-en-p	20D-UM001